Find a Stockist near you
Used for connecting Low Density Polyethylene Pipe (LDPE) and Enduroflex to Male Threads. Can also be used to connect flexible pipe and hose. BSPT Thread Size x Pipe Size.
Features & Benefits
Easy Fit Poly Fittings Maximum Working Pressure; 16 Bar (1600 kPa, 235 psi) at 20 degrees C.
Hansen does not recommend the use of any Hansen Easy Fit Fittings under any driveways, paths or foundations.
Yes. While marine applications vary, Hansen Easy Fit Poly Fittings are resistant to sea water. The fittings will not leach any substances that will be harmful to marine life. Hansen Easy Fit Poly fittings have provided excellent service in marine applications for many years without failure. If you require further information, please contact us with details regarding your application.
No, as the high concentration of chlorine used in the water for pools will attack the material. The fitting material is only suitable for use with domestic water. Hansen products that are used in this application will not be covered by our limited lifetime warranty.
Yes, all Hansen manufactured products carry our Limited Lifetime Warranty*
*For more information about the Hansen Limited Lifetime Warranty, please visit the Legal Information link in the footer.
Wind the nut by hand onto pipe as tight as possible. Use a spanner or pipe grips to tighten until nut is frim on the pipe. For more information refer to installation instructions.
Refer to a qualified water reticulation installer for professional advice to suit your needs.
Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by our limited lifetime warranty.
New Zealand LDPE (Low Density Polyethylene Pipe), EnduroFlex, Australian Rural Class B, Irish Imperial Polythene Pipes (including washdown hose and non toxic tube).
