Compliance
Building Product Information Sheets
This section contains documents required to be available to the consumer for products that are used in building covered by the New Zealand Building Code. These include MBIE Building Product Information Sheets. For Relevant Certificates and Approvals please see sections below.
TELARC
Hansen Products (NZ) Limited are justifiably proud to be certified to ISO9001:2015 by Telarc Certifying Authority. ISO 9001:2015 is a Quality Management System which aids to increase the efficiency and effectiveness of any organisation, to manage the processes and activities used to eliminate risk to the customer and to ensure that its products and service conform to customer requirements, thus ensuring customer satisfaction.
The ISO 9001 definition of “quality” refers to all the features of a suppliers product and service, which are required by the customer. As part of ISO Certification, a fully documented quality system must be in place which is audited by an approved accreditation body at planned intervals (usually every 6 months). These audits ensure that the system is being implemented and followed. Every 3 years a recertification audit is conducted.
Internally our Process covers internal audits of the system. Inspections have been implemented at the following stages of manufacture; goods inwards, first off, in process, final, and customer return analysis. Non-conformances are checked to ensure corrective actions are taken and are the actions effective. The system covers training, that all processing is fully documented, that work instructions are available for all tasks, that all documentation is controlled, and customer requirements are clear.
We are certified for the design, manufacture, assembly, packaging, distribution and marketing of our products.
Click to view Telarc Certificate
AS/NZS 4020:2018
AS/NZS 4020:2018 - Testing of products for use in contact with drinking water.
- Determines the methods used and the measure of compliance for the effects of a product on the taste and appearance of water.
- Determines the ability of a product to support the growth of micro-organisms and the quantity of toxic metallic and non metallic substances leached from the product when exposed to the test water.
HANSEN™ Easy Fit Pipe Fittings, Easy Fit Compression Fittings, True Fit Threaded Fittings, True Fit Tank Fittings, Quick Connect Unions, Quick Couplings, Full Flow Ball Valves, Foot Valves & Check Valves, Fastflo Valve, Superflo Valve, Maxflo Valve and Leveller Valve meet the above standard as tested by an independent testing authority, the Australian Water Quality Centre.
HANSEN™ Easy Fit Pipe Fittings in sizes 15mm to 50mm (1/2” to 2”), Easy Fit Compression Fittings in sizes 16mm to 110mm, True Fit Threaded Fittings in sizes 6mm to 100mm (1/8” to 4”), True Fit Tank Fittings in sizes15mm to 100mm (1/2” to 4”), Full Flow Ball Valves in sizes 15mm to 50mm (1/2” to 2”), Foot Valves & Check Valves in sizes 25mm to 63mm (1” to 2 1/2”) Fastflo Valve in sizes 15mm to 25mm (1/2” to 1”), Superflo Valve in sizes 15mm to 25mm (1/2” to 1”), Maxflo Valve in size 20mm to 32mm 3/4” to 1 1/4”) Leveller Valve in sizes 32mm, 40mm & 50mm (1 1/4” 1 1/2”, 2”) and Tapping Saddles in sizes 25mm to 63mm (1” to 2 1/2”) have been AS/NZS 4020 approved.
WaterMark
The WaterMark™ Certification Scheme is a certification scheme for plumbing and drainage products to ensure that plumbing and drainage materials and products are fit for purpose and appropriately authorized for use in plumbing installations. It also provides a uniform national approach to plumbing product approvals. The plumbing industry in Australia & New Zealand supports the use of the WaterMark™ which, when used properly, is an excellent way of helping consumers be confident about the quality of the plumbing product to which it is applied. Material and product failures in plumbing systems can cause contamination of the water system and be a public health concern. Under the Scheme, Hansen Easy Fit Compression Fittings & Rapidflo & Sloflo Rain Relief Valves carry the WaterMark approval and are accepted for use in all Australian states and territories & throughout New Zealand - subject to correct installation practices in accordance with AS/NZS 3500 and any local deviations.
The procedures and technical requirements of this scheme are identified in:
AS 5200.000-2006 Technical specification for plumbing and drainage products - Procedures for certification of plumbing and drainage products.
The Watermark Certification at Hansen is achieved through:
- Testing by a recognised testing laboratory;
- Comply with an approved specification (WaterMark Technical Specification);
- Is manufactured in accordance with an approved Quality Assurance Program
- Carries a warranty
Easy Fit Compression Fittings Certification No: WMKA21978
Rapidflo & Sloflo Rain Relief Valves Certification No: WMK26232
Click to view WaterMark Approvals
WRAS
WRAS formerly known to the industry as Wrc.
WRAS approval means that HANSEN™ True Fit Threaded Fittings, True Fit Tank Fittings, Easy Fit Compression Fittings and Quick Connect Barrel Unions are approved for use with potable (drinkable) water, and that they will not leach contaminants into the water. The Water Research Council in the UK is the highest recognised water testing organisation in the world and we believe HANSEN™ are the only plastic threaded pipe fitting in Australasia to achieve this standard.
The Product and Assessment Group of the Scheme finds that the use of these fittings or units, when correctly installed, will not contravene the requirements of The Water Supply (Water Fittings) Regulations 1999, The Water Byelaws 2004 Scotland or the Water Regulations (Northern Ireland) 1991 and that a reference to the fittings or units will be included in the Scheme’s Water Fittings and Material Directory.
Click to view WRAS Certificates
IMCI
Hansen Ball Valves have been approved by the International Marine Certification Institute to ISO standard 9093-2 and meets the requirements of the Recreational Craft Directive 94/25/EC meaning that it is safe to use in salt water environments.
Click to View Hansen's IMCI Approval
CITY COUNCIL APPROVALS
Hansen Easy fit Compression fittings have met the strict quality and performance standards required to be included in the approved Materials lists for the following Councils;
Watercare Services
Whangarei District Council
Far North District Council
Hamilton City Council
Tauranga City Council
Western Bay District Council
New Plymouth District Council
Whanganui District Council
Palmerston North City Council
Wellington Water
Marlborough District Council
Christchurch City Council
Dunedin City Council
Queenstown Lakes District Council
Co Lab ( Waikato LASS) RITS. This covers 9 Waikato Councils
Hansen Easy Fit Compression fittings meet the or exceed the requirements of AS/NZS419:2020 and AS/NZS4020:2018 as specified by the following Councils and as such are approved for use in their Networks;
Whakatane District Council
Opotiki District Council
Gisborne District Council
Wairoa District Council
Napier City Council
Central Hawked Bay District Council
Tararua District Council
Carterton District Council
Manawatu District Council
Rangatikei District Council
Ruapehu District Council
Taupo District Council
South Taranaki District Council
Horewhenua District Council
Kapiti Coast District Council
Nelson City Council
Tasman District Council
Kaikoura District Council
Hurunui District Council
Waimakariri District Council
Selwyn District Council
Ashburton District Council
Timaru District Council
MacKenzie District Council
Waimate District Council
Waitaki District Council
Oamaru District Council
Central Otago District Council
Clutha District Council
Gore District Council
Southland District Council
Westland District Council
Grey District Council
Buller District Council