Find a Stockist near you
Used for connecting Medium Density Polyethylene Pipe (MDPE) to Male Threads. Pipe Size x Pipe Size x BSPT Thread Size.
Features & Benefits
Fitting sizes 16mm to 63mm Maximum Working Pressure; 16 Bar (1600 kPa, 235 psi) at 20 degrees C.
Fitting sizes 75mm to 100mm Maximum Working Pressure; 12.5 bar (1250 kPa, 182 psi) at 20 degrees C.
Hansen does not recommend the use of any Hansen Easy Fit Fittings under any driveways, paths or foundations.
Yes, Hansen Easy Fit MD Compression Fittings are potable (drinking) water approved.
Yes, all Hansen manufactured products carry our Limited Lifetime Warranty*
*For more information about the Hansen Limited Lifetime Warranty, please visit the Legal Information link in the footer.
Up to 32mm just tighten hand tight and all sizes above use a spanner to tighten another ½ to 1 turns past hand tight. Remember you already have a seal once the pipe is past the O-ring, all the nut is doing is compressing the grip ring onto the pipe to hold the pipe in place.
